NC studio controller system PM53C is a three-axis engraving machine cnc motion controller. It is widely use on three axis cnc router engraving machines. Different with Richauto DSP cnc router controller, nc studio cnc controller is a PC-Based numeric controller. And the computer gives more possibility to nc studio controller. First, because computers have more storage space than Richauto DSP controller, nc studio controller system is prior to dsp control system on capacity of reading big cnc files; second, weihong system can display real-time working toolpath by computer during machining while dsp system cannot. As every cnc router operator knows, the files of furniture carving is always big. So for the users who mainly do carving jobs, the nc studio cnc controller PM53C is the first choice.   

One full set of NC studio weihong controller PM53C includes:

PCI card – 1 Piece (Model. Weihong PM53C)

Motion control card – 1 Piece (Model. Weihong EX23A3)

Data cable – 1 Piece

Software CD – 1 Piece (Ncstudio V8)

The PCI card (Weihong PM53C) is inserted into the PCI slot of computer host, and the motion control card (Weihong EX23A3) is mounted in the electronic control cabinet of the cnc router machine; software (Ncstudio) is installed in the computer for running the machine. This enables communication from the computer side to the machine side. Instructions are sent from ncstudio software, to the PCI card (Weighong PM53C), then from PCI card to the motion card (Weihong EX23A3) via data cable, and finally reach each axis and spindle. It is the working way of ncstudio controller PM53C.

What kind of computer can work with NC studio controller system PM53C? Any computer which meets the below configuration can work. 

Desktop Computer

CPU: the frequency of 1G or above

Memory: 512M or more

Hard Disk: 20G or more

Graphics Card: 1024x768 or more

Motherboard expansion slot: one PCI/PCIE slot, or more 

Accessory device for you may have interest: CNC MPG for NC studio PM53C PM53B

Choosing NC studio controller system PM53C, you will get these benefits as follows.

NC studio based on PC operating system, the user interface is simple, easy to learn etc.

1) Automatic processing supports standard G codes, DXF format and ENG format, supports mainstream CAD/CAM software, such as: UG, Pro/E, MasterCAM, ArtCAM, Type 3 and more.

2) Manual mode supports continuous, step and jog manual control methods; The machine can be controlled not only by the machine input equipment (such as hand wheel), but also through computer input equipment (such as keyboard, mouse) to complete manual operation.

3) Array processing function, this function can do repeated execution of the processing programaccording to the number of rows specified by the user.

4) Rotating mirror processing function, which can do rotate mirror processing as the center of workpiece origin.

5) Step function, convenient for the user to set the amount of feed, and step size can be adjusted as you need.

6) The data entry function allows the user to enter the G code online and execute immediately.

7) Advanced machining instructions. Simply enter a few parameters; you can complete the end milling, crochet and other functions.

8) Single step mode. The user can set the processing task to be single step mode, thus providing good support for error diagnosis and fault recovery.

9) Breakpoint continues, jump execution, and other advanced automatic functions.

10) Function of axes accurate back to mechanical origin point.

11) Automatic tool setting function.

12) Save/resume workpiece condition function. The problem of suddenly power off is fully considered in the design process of nc studio controller system. The system can protect the files from damage when power off; functions of breakpoint continue and accurate back machine origin guarantees the reliable recovery after system restart. 

13) Feed ratio on-line adjustment. During machining, the user can adjust the feed ratio at any time. Minimum from 0, same to suspension working; maximum to 120%.

14) Function for high-smooth speed connection algorithm. In other cnc control system, connection speed between two G codes commonly is a fixed value (e.g., it may be 0 or a certain small value). However, nc studio weihong controller adopts a particular machining speed adaptive prediction algorithm. In accordance with speed value, direction, maximum acceleration, and the function of forward prediction, the algorithm adaptively decides the connection speed between the current instruction and the next instruction. It has greatly increased the processing efficiency (efficiency enhancement range from 30% to 300%), improved the processing capability, and eliminated the speed chatter marks left on the processing surface.

15) The display of 3D simulation function. Through a simple operation, user can observe  three-dimensional processing results from all angles, which help user understand processing results more accurate and more intuitive.

16) The simulation function. NC studio controller system PM53C can do fast simulation processing on the program, and finish in a very short period of time, check whether has error in processing files, whether processing results are ok, and calculate the actual processing time required accurately.

17) The log function helps the user to see detailed processing information and system diagnostic information.

18) Enclosed file manager. As long as the user save processing program files to the specified directory, NC studio system can manage the files in its enclosed file manager.

19) Enclosed file editor, users can put the processing files into the editor and edit it at any time.

20) File processing information, file processing information window can help users count file execution time, processing range and other important information.

21) Function of parameter backup. Users can backup the parameters as per your need so that they can be recovered when needed.

Get all cnc router spare by one stop shopping here. Please inquire now !